MIDO Q hot water bathroom radiator
Surface:
anthracite gray
|
Height dimension (in mm):
872
|
Width dimension (in mm):
430
€361.93*
% €823.73* (56.06% saved)Available in 15 days, delivery time 1-2 Tag(e)
Product number:
BMQ087043AT3M
EAN:
4045862979640
Manufacturer:
BEMM
MIDO Q hot water bathroom radiator
- Bemm Mido Q, bathroom radiator series BMQ, for central heating (additional equipment with electric heating element) and for heating towels and textiles
- Horizontal rectangular tubes 25 x 20 mm connected to the vertical square tubes 30 x 30 mm using a special process
- With openings for towels
- With M connection DN 15 (1/2) x 50 mm centered at the bottom and 2 connections DN 15 (1/2) from the bottom, right and left outside, as well as 1 vent connection DN 15 (1/2) from the top right
- Environmentally friendly, emission-free powder-coated surface DIN 55900 and baked at approx. 180 degrees C
- anthracite grey, other colors on request according to BEMM color palette
- Standard accessories: DN 15 (1/2) vent plug and 2 DN 15 (1/2) blanking plugs and 4 sturdy, easy-to-install steel fixings that comply with AK3 in accordance with VDI 6036, with hexagonal wood screws and plugs
- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance measured by a recognized testing institute in accordance with DIN EN 442-2
- CE declaration of performance in accordance with EU-BauPVo
- Heating medium Water Maximum permissible operating temperature 100°C Maximum permissible operating overpressure 6 bar
- If a heating element is also used, the manufacturer recommends a maximum output of 400 watts
- 872 x 430mm
- Horizontal rectangular tubes 25 x 20 mm connected to the vertical square tubes 30 x 30 mm using a special process
- With openings for towels
- With M connection DN 15 (1/2) x 50 mm centered at the bottom and 2 connections DN 15 (1/2) from the bottom, right and left outside, as well as 1 vent connection DN 15 (1/2) from the top right
- Environmentally friendly, emission-free powder-coated surface DIN 55900 and baked at approx. 180 degrees C
- anthracite grey, other colors on request according to BEMM color palette
- Standard accessories: DN 15 (1/2) vent plug and 2 DN 15 (1/2) blanking plugs and 4 sturdy, easy-to-install steel fixings that comply with AK3 in accordance with VDI 6036, with hexagonal wood screws and plugs
- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance measured by a recognized testing institute in accordance with DIN EN 442-2
- CE declaration of performance in accordance with EU-BauPVo
- Heating medium Water Maximum permissible operating temperature 100°C Maximum permissible operating overpressure 6 bar
- If a heating element is also used, the manufacturer recommends a maximum output of 400 watts
- 872 x 430mm
Personal expert advice
Fast & smooth delivery
Fair online prices with buyer protection
Many different payment methods
Free order check
Zubehör
Prod. no.:
ZMUVDCR5
M-valve Softline straight through with thermostat Puro
- M-valve Softline DN15 x 50 mm with presetting, for filling, shutting off and draining, for use in 2-pipe systems up to 10 bar operating pressure, with any flow direction, nickel-plated, with thermostat connection thread M30 x 1.5 with protective cap, with 2 special screw-in connectors with O-ring DN 15 (1/2) and male DN 20 (3/4) Eurocone for pipe connection using compression fitting- Thermostatic head generally on the left, flow direction may be determined by radiator requirements- Complete with elegant Softline cladding made of impact-resistant plastic in the color chrome or in the color of the radiator- Valve and cover packed in 1 box- Including Puro thermostat, elegant, slimline designer radiator controller, with built-in fluid element, with chrome-plated handle sleeve- In unfavorable lighting conditions or for the visually impaired, the basic setting 3 can be easily found again using the tactile setting aids- For valve connection M30 x 1.5- Minimum position: Zero position
Variants from €88.60*
Prod. no.:
ZMUVECR5
M-valve Softline angle shape, with thermostat Puro
- M-valve Softline DN15 x 50 mm with presetting, for filling, shutting off and draining, for use in 2-pipe systems up to 10 bar operating pressure, with any flow direction, nickel-plated, with thermostat connection thread M30 x 1.5 with protective cap, with 2 special screw-in connectors with O-ring DN 15 (1/2) and male DN 20 (3/4) Eurocone for pipe connection using compression fitting- Thermostatic head generally on the left, flow direction may be determined by radiator requirements- Complete with elegant Softline cladding made of impact-resistant plastic in the color chrome or in the color of the radiator- Valve and cover packed in 1 box- Including Puro thermostat, elegant, slimline designer radiator controller, with built-in fluid element, with chrome-plated handle sleeve- In unfavorable lighting conditions or for the visually impaired, the basic setting 3 can be easily found again using the tactile setting aids- For valve connection M30 x 1.5- Minimum position: Zero position
Variants from €88.60*
Prod. no.:
ZPUVDCR5
M-valve Purline straight through with thermostat Puro
- M-valve Purline DN15 x 50 mm with presetting, for filling, shutting off and draining, for use in 2-pipe systems up to 10 bar operating pressure, with any flow direction, nickel-plated, with thermostat connection thread M30 x 1.5 with protective cap, with 2 special screw-in connectors with O-ring DN 15 (1/2) and male DN 20 (3/4) Eurocone for pipe connection using compression fitting- Thermostatic head generally on the left, flow direction may be determined by radiator requirements- Complete with elegant Purline cover made of impact-resistant plastic in the color chrome or in the color of the radiator, including Allen screw and logo cover- Valve and cover packed in 1 box- Including Puro thermostat, elegant, slimline designer radiator controller, with built-in fluid element, with chrome-plated handle sleeve- In unfavorable lighting conditions or for the visually impaired, the basic setting 3 can be easily found again using the tactile setting aids- For valve connection M30 x 1.5- Minimum position: Zero position
Variants from €88.60*
Prod. no.:
ZPUVECR5
M-valve Purline angle shape, with thermostat Puro
- M-valve Purline DN15 x 50 mm with presetting, for filling, shutting off and draining, for use in 2-pipe systems up to 10 bar operating pressure, with any flow direction, nickel-plated, with thermostat connection thread M30 x 1.5 with protective cap, with 2 special screw-in connectors with O-ring DN 15 (1/2) and male DN 20 (3/4) Eurocone for pipe connection using compression fitting- Thermostatic head generally on the left, flow direction may be determined by radiator requirements- Complete with elegant Purline cover made of impact-resistant plastic in the color chrome or in the color of the radiator, including Allen screw and logo cover- Valve and cover packed in 1 box- Including Puro thermostat, elegant, slimline designer radiator controller, with built-in fluid element, with chrome-plated handle sleeve- In unfavorable lighting conditions or for the visually impaired, the basic setting 3 can be easily found again using the tactile setting aids- For valve connection M30 x 1.5- Minimum position: Zero position
Variants from €81.46*