Soul-S Air Mix, comfort bathroom radiator 1176 x 550mm
Execution 1:
Connections on the right
|
Surface:
white
|
Height dimension (in mm):
550
|
Width dimension (in mm):
1176
Product number:
UBB117055SW2R
EAN:
4064708182570
Manufacturer:
BEMM
Soul-S Air Mix, comfort bathroom radiator 1176 x 550mm
- BEMM Soul-S Air Mix, comfort bathroom radiator series UBB/UAB, for central heating, for heating towels and textiles, including integrated fan heater for purely electric operation
- Horizontal rounded flat profile tubes 50 x 10 mm connected to vertical round tubes 30 mm in a special water-bearing process
- With 3 - 4 openings for towels or textiles
- Design optionally with vertical pipes on the left and open side on the right or vertical pipes on the right and open side on the left
- Vertical pipes positioned 50 mm apart for flow and return
- With DN 15 (1/2) x 50 mm connections on one side at the top and bottom
- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C
- Standard color white 9016, optionally in other colors according to BEMM color palette
- Standard accessories: 1 vent plug DN 15 (1/2) and 4 sturdy, easy-to-install fastenings comply with AK3 in accordance with VDI 6036, with hexagonal wood screws and dowels
- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2
- CE declaration of performance in accordance with EU-BauPVo
- Heating medium water: maximum permissible operating temperature 100°C maximum permissible operating overpressure 4 bar
- Including integrated fan heater 1000 W for purely electrical operation with timer (1/4, 1/2, 1, 2h), optionally with radio clock room thermostat
- 230 VAC, IP24, class II, with approx. 1.2 m connection cable, white plastic housing with gray cover (also with colored radiator) and radio receiver
- Connections on the right, open to the left
- Horizontal rounded flat profile tubes 50 x 10 mm connected to vertical round tubes 30 mm in a special water-bearing process
- With 3 - 4 openings for towels or textiles
- Design optionally with vertical pipes on the left and open side on the right or vertical pipes on the right and open side on the left
- Vertical pipes positioned 50 mm apart for flow and return
- With DN 15 (1/2) x 50 mm connections on one side at the top and bottom
- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C
- Standard color white 9016, optionally in other colors according to BEMM color palette
- Standard accessories: 1 vent plug DN 15 (1/2) and 4 sturdy, easy-to-install fastenings comply with AK3 in accordance with VDI 6036, with hexagonal wood screws and dowels
- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2
- CE declaration of performance in accordance with EU-BauPVo
- Heating medium water: maximum permissible operating temperature 100°C maximum permissible operating overpressure 4 bar
- Including integrated fan heater 1000 W for purely electrical operation with timer (1/4, 1/2, 1, 2h), optionally with radio clock room thermostat
- 230 VAC, IP24, class II, with approx. 1.2 m connection cable, white plastic housing with gray cover (also with colored radiator) and radio receiver
- Connections on the right, open to the left
Personal expert advice
Fast & smooth delivery
Fair online prices with buyer protection
Many different payment methods
Free order check
Zubehör
Prod. no.:
ZVVUV15V5
Valve block Vatiant
- Variant valve block, DN 15 x 50 mm in angle and straight-through design, with presetting, can be shut off, for use in two-pipe and single-pipe heating systems up to 10 bar operating pressure and 110 °C operating temperature- Valve insert and insert for return shut-off can be exchanged, allowing the valve (flow) to be installed on the left or right as required- Thermostat connection thread M30x1.5 with protective cap- The bypass for single-pipe operation can be adjusted- Complete with plastic cover in white 9016 or chrome-plated- For the connection of copper, mild steel and plastic pipes, use on-site compression fittings for Eurocone with male thread DN 20 (3/4)
Prod. no.:
ZVXMEP15ECR5
MEP valve (bivalent) DN 15 x 50 in angle design
- MEP valve (bivalent), DN 15 x 50 mm in angle design, with presetting, can be shut off, for use in 2-pipe systems up to 10 bar operating pressure and 110 °C operating temperature- Valve insert and insert for return shut-off can be exchanged, allowing the valve (flow) to be installed on the left or right as required- Thermostat connection thread M30x1.5 with protective cap- Solid chrome-plated valve design- For connecting copper, mild steel and plastic pipes, use on-site compression fittings for Eurocone with DN 20 (3/4) male thread
Variants from €115.30*
Prod. no.:
ZVXMEP15ESW5
MEP valve (bivalent) DN 15 x 50 in angle design
- MEP valve (bivalent), DN 15 x 50 mm in angle design, with presetting, can be shut off, for use in 2-pipe systems up to 10 bar operating pressure and 110 °C operating temperature- Valve insert and insert for return shut-off can be exchanged, allowing the valve (flow) to be installed on the left or right as required- Thermostat connection thread M30x1.5 with protective cap- Solid valve design in white 9016- For connecting copper, mild steel and plastic pipes, use on-site compression fittings for Eurocone with DN 20 (3/4) male thread